Protector Alpin

3,145.00DKK
* Prices incl. VAT, excl. shipping costs.
602301.7.0
602301.7.0
HAIX
Falling branches, toppling tree trunks and the risk of chainsaw cuts are just some of the dangers to which the feet of lumberjacks and loggers are exposed. The Protector Alpin by HAIX offers cut protection class 3 and will shield you in any situation. A broad and padded toe cap helps prevent injury to the toes. Liquids such as oil and petrol are unable to penetrate when you undertake activities such as maintaining electronic equipment or fuelling construction vehicles. The Protector Alpin is also resistant against heat and cold. This makes it perfectly suited to working with black, heat-reflecting pond linings in summer or to clearing snow in winter. Stability across any terrain The areas in which landscape gardeners work are highly diverse. Flexible footwear is, therefore, very much required. The Protector Alpin by HAIX provides a firm grip on wet leaves, icy pathways or steep slopes. Its robust rubber and PU (polyurethane) sole is highly abrasion resistant and guarantees a secure foothold on slippery ground. Spikes attached to the outsole ensure a good lateral grip on tree trunks when carrying out felling work. Gardeners working on particularly steep or icy terrain may also like to equip their boots with crampons to prevent any possibility of slipping. Comfort for the feet and joints It may well be that hard physical work will bring you out in a sweat. The HAIX Protector Alpin is a highly breathable boot which prevents build-up of internal moisture. A GORE-TEX ®  membrane consisting of four-ply laminate enables warm and damp air to be expelled, whilst an integrated fleece insole and an anatomically formed inlay also absorb sweat extremely effectively. The Protector Alpin is also completely watertight. When working in the rain or watering flower beds, you can also be sure that your feet will remain dry. Further comfort is provided by an impact-absorbing PU wedge integrated into the sole. This cushions your steps and reduces pressure on the muscles and joints. Upper material The HAIX Protector Alpin is manufactured in high quality bull leather. This material is about three millimetres thick and especially breathable. The foot and calf areas can be laced to different tightnesses in order to provide a perfect individual fit. Long and hard-wearing threads are integrated into the boot. This means that the HAIX Protector Alpin fulfils the characteristics of cut protection class 3 and is able to withstand chainsaw speeds of up to 28 m/s. The boot’s double tongue can be individually adapted to your foot via two strip fasteners at the bottom and top ends. Lining, inlays, toe cap The HAIX Protector Alpin features an inner lining made of abrasion-resistant fabric. A four-ply GORE-TEX ® laminate keeps it both waterproof and highly breathable. The pumping motion generated as you move along helps to expel warm moist air. An anatomically formed insole absorbs moisture before bacteria can cause any unpleasant odours. This inlay can also be removed and washed if required. A stable plastic/fleece insole integrated into the boot keeps your feet dry by assisting with the moisture absorption process. It also reduces discomfort from individual pressure points created when, for example, you walk across stony ground. This is a boot which offers a high degree of torsion resistance – i.e. extra lateral stability to prevent any twisting. All of this ensures a firm grip at all times and safe passage across unpaved roads which may be covered with snow, stones or ice. An anatomically formed toe cap protects the front foot area against any injuries which may potentially be caused by falling objects. The toe cap is padded and extra wide so as to afford plenty of space. Sole The outsole of the HAIX Protector Alpin comprises a hard-wearing mix of rubber and PU (polyurethane). This offers a particularly high degree of slip resistance. The rubber used in the manufacture of the sole is also colour fast and will not leave any black marks on light-coloured surfaces. A bold tread provides a perfect grip on any terrain, whilst rubber edging gives additional stability. The spikes in the sole area can be changed to avoid any danger of slipping on moderate slopes. Crampons can be attached to the outsole if you are working on steeper ground. The sole of the HAIX Protector Alpin prevents any penetration by oil and petrol and insulates against the heat and cold. At the same time, an impact-absorbing integrated PU wedge cushions your steps and thus reduces pressure on the joints. The Protector Alpin is an ideal cut protection boot for professional gardeners. It has been awarded the “KWF PROFI” seal of quality by the German Forestry Advisory Board and offers a perfect combination of functionality, safety and comfort. It is also guaranteed to be extremely durable, stable and slip resistant. Order your new HAIX professional safety boots now.

Protector Alpin

(0)

Your reliable partner in steep terrain. Your Protector Alpine with spike attachment.

InStock
3,145.00DKK *
Cut protection class 3

* Prices incl. VAT, excl. shipping costs.

3,145.00DKK

* Prices incl. VAT, excl. shipping costs.

Art.: 602301
  • Cut protection class 3 Cut protection class 3
  • Durably waterproof Durably waterproof
  • Claw element prevents slipping Claw element prevents slipping
  • Relieving damping Relieving damping
  • KWF professional tested KWF professional tested
  • Made in Europe Made in Europe

Maximum safety when working in the precinct

Your Protector Alpin with cut protection class 3 and claw element gives you a secure grip when working in steep terrain.

Certified cut protection level 3

Your Protector Alpin meets the cut protection class Level 3. This means your feet are safe from chainsaw cuts at a running speed of up to 28m/s.

Always a firm stand

With your Protector Alpin, even branches and twigs won't throw you off balance. The Forest Grip System prevents you from slipping sideways.

Shockproof thanks to Protective steel toe cap

The integrity of your feet is essential. The Protector Alpin therefore features a protective cap made of shock-resistant steel. The Protective steel toe cap is anatomically shaped and meets the highest safety requirements.

Secure hold thanks to anti-slip

The Protector Alpin gives you stability in every position. To protect you against skidding, the sole of the Protector Alpin with its special rubber compound and innovative tread construction offers extremely high slip resistance and grip on a wide variety of surfaces.

Special comfort even on long days

Your Protector Alpine fits perfectly to your foot thanks to the two-zone lacing system.

Waterproof thanks to GORE-TEX®

Your feet stay dry and you stay healthy because the Protector Alpin is permanently waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining of the Protector Alpin.

Relieving cushioning with HAIX absorption

You'll experience a comfortable feel in the Protector Alpin even when you're out for several hours. Because the integrated cushioning wedge inside cushions your steps. We call this HAIX Absorption: for drive even on long working days.

Optimal hold thanks to 2-zone lacing

The Protector Alpin adapts perfectly to your foot in both the instep and the shaft area, so that it offers you optimal support. This is ensured by 2-Zone Lacing, an innovative 2-zone lacing system for foot and upper.

Precise fit thanks to special lasts

The right shoe for your feet. Thanks to specially designed lasts, your Protector Alpin fits perfectly and provides ultimate wearing comfort, the whole day long.

Your shoe from every angle

The hard facts

HAIX Protector Alpin

Article no. 602301

Certified for orthopedic insoles
GORE-TEX®
Relieving damping
Forest Grip System
Resolable
Cut protection level 3
Certification:
CE EN ISO 20345:2011 S2 HRO HI CI WR SRA
Colour:
black
Height in cm:
20,0 cm
Upper material:
Suede leather
Cut protection class:
class 3
Safety classification:
S2
Fastener:
2 zone lacing
Waterproof:
waterproof through Gore-Tex
Weight per shoe:
1370g
Leather thickness:
2,8 - 3,0
KWF Certificate:
KWF-PROFI

Your questions,
our honest answers

The Protector Alpin has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Protector Alpin to be adapted even more optimally to the foot and to support its anatomical structure.

The rubber edge strip of the Protector Alpin provides stability and protects against spikes or stones. It therefore prevents unpleasant pressure points on the foot.

The shoes can be used for all hiking or hunting activities without annoying restrictions.

The construction and boot design of the Nature Two GTX allows you to use crampons. They are therefore suitable for use on slopes or rough terrain.

Particularly popular for mountain hunting and especially alpine hiking.

The Protector Alpin can be cared for quickly and easily. With colourless, grease-free shoe polish for suede and nubuck leather, which does not affect the breathability of the leather or the colour of the shoe, and a waterproofing agent, the shoe is cared for.

The uncomplicated Protector Alpin ensures long-lasting enjoyment of the shoe's quality.

The replaceable claw element of the Protector Alpin in the joint area of the sole prevents lateral slipping on branches and twigs. It provides additional stability and safety.

For even better grip on steep terrain.

The Protector Alpin is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 28 m per second.

Focus one hundred percent on your job thanks to complete protection of the Protector Alpin.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Protector Alpin is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.

What other customers are saying

0 Customer reviews

Also available in other versions for you

Write an evaluation
Defective Sufficient Satisfactory Good Very Good
way too small
too small
suitable
too large
way too large

The fields marked with * are required.

Customers who bought this item also bought

We are
100 Percent
Made in Europe
Learn more
VERSANDKOSTENFREI MIT DEM CODE: hxship241