Protector Ultra 2.0 GTX lime-green
Protector Ultra 2.0 GTX lime-green
Flexible use: Your Protector Ultra 2.0 GTX with cut and puncture protection.
- Cut protection class 2
- Durably waterproof
- Protective sole (metal free)
- Made in Europe
Certified cut protection level 2
Your Protector Ultra 2.0 lime-green meets the cut protection class Level 2. This means your feet are safe from chainsaw cuts at a running speed of up to 24m/s.
Puncture-resistant thanks to protective sole (metal free)
The textile penetration protection of the Protector Ultra 2.0 lime-green offers your feet the necessary protection, for example, when stepping on sharp-edged objects.
Shockproof thanks to Protective steel toe cap
The integrity of your feet is essential. The Protector Ultra 2.0 lime-green therefore features a protective cap made of shock-resistant steel. The Protective steel toe cap is anatomically shaped and meets the highest safety requirements.
Optional: GRIP + SPIKES
Get even more out of your Protector Ultra 2.0 lime-green with the optional Grip + Spikes accessory. The metal spikes for self-mounting provide optimum grip in the forest and additional hold on tree trunks.
Waterproof thanks to GORE-TEX®
Your feet stay dry and you stay healthy because the Protector Ultra 2.0 lime-green is permanently waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining of the Protector Ultra 2.0 lime-green.
Optimal hold thanks to 2-zone lacing
The Protector Ultra 2.0 lime-green adapts perfectly to your foot in both the instep and the shaft area, so that it offers you optimal support. This is ensured by 2-Zone Lacing, an innovative 2-zone lacing system for foot and upper.
Breathable with Climate System
In the Protector Ultra 2.0 lime-green your foot can breathe, because a special foam system ensures that the air circulates in the shoe and moisture can escape. The Climate System works like an air conditioning system in a shoe.
Precise fit thanks to special lasts
The right shoe for your feet. Thanks to specially designed lasts, your Protector Ultra 2.0 lime-green fits perfectly and provides ultimate wearing comfort, the whole day long.
Different insoles are available for Protector Ultra 2.0 lime-green to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.
Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.
The Protector Ultra 2.0 lime-green has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.
This allows the Protector Ultra 2.0 lime-green to be adapted even more optimally to the foot and to support its anatomical structure.
The Protector Ultra 2.0 lime-green can be cared for quickly and easily. With colourless, grease-free shoe polish for suede and nubuck leather, which does not affect the breathability of the leather or the colour of the shoe, and a waterproofing agent, the shoe is cared for.
The uncomplicated Protector Ultra 2.0 lime-green ensures long-lasting enjoyment of the shoe's quality.
The Protector Ultra 2.0 lime-green is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 24 m per second.
Focus one hundred percent on your job thanks to complete protection of the Protector Ultra 2.0 lime-green.
Your Protector Ultra 2.0 lime-green can be perfectly combined with the optionally available Grip + Spikes mounting set. The set consists of a two-part assembly spanner and ten small spikes. The metal spikes are screwed into the designated areas in the sole of the shoe and provide additional grip on tree trunks.
Get even more out of your Protector Ultra 2.0 lime-green with the optional Grip + Spikes accessory.
In contrast to the Protector Ultra, the Protector Ultra 2.0 GTX is an S3 shoe with a puncture-resistant sole. Spikes can also be attached to the new, extremely non-slip sole of the Protector Ultra 2.0, for example to provide more grip on felled tree trunks. This is not possible with the Protector Ultra.
The Protector Ultra 2.0 GTX keeps your feet safe during all work thanks to the puncture-resistant sole and cut protection.
You can find all the right spare parts for our shoes on our spare parts page.
We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.
Half UK sizes differ in length by only a few millimetres.
You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.
Simply clean it with a brush and water and let it air dry.
From experience, the Protector Ultra 2.0 lime-green is a normal size. We therefore recommend that you choose the usual size.
Experience has shown that the shoe fits normally.
HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.
By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.